ZRT18OS

Call us or send an email

info@tatarek.com.pl

ZRT18OS

Subtotal	3 861,00 zł
VAT 23%	888,03 zł
Price	4 749,03 zł

SKU:

ZRT18OS

Subtotal	3 861,00 zł
VAT 23%	888,03 zł
Price	4 749,03 zł

Call us or send an email

713731488 wew. 23

info@tatarek.com.pl

User manual

rt18_v.111_pl.pdf

rt18_v.111_ang.pdf

rt18_v.111_niem.pdf

Informacje o produkcie

The RT-18 VETRO OS controller is the most efficient combustion optimizer for the operation of stove-fitting furnaces and stove inserts that supply storage masses. The software also allows you to operate the water system, but then you need to purchase additional dedicated water sensors (RT-18 VERTO OS / GX - available in the set). This controller provides support for external devices, such as: a ventilation device, a recuperator, a chimney fan or an accumulator mass damper drive. In this model, it is possible to use a door sensor! The model is offered only with a SEALED damper !!! The set does not include sensors for handling water systems! NOVELTY!!!
Preloaded language software: POLISH, GERMAN. ENGLISH

Specyfikacja

Power supply:

230 V 50 Hz

Type of air damper:

Sealed

Diameter of air damper:

100mm

Air damper 180 mm:

ONLY ON REQUEST

Wyposażenie opcjonalne

CZUJ6
CZUJ13
CZUJ09
SIŁOWNIK01

Sensor for measuring temperature of flue gas (0 ... 1200 ° C) in stoves and stove-fitting furnaces for the controllers RT-08OM / OMG, RT-08OS / OSG RT-08SAC. When used in furnaces where the sleeve of the sensor is exposed to direct contact with flames an extra ceramic cover is required to be applied !!!

Due to the specific construction of the sensor cable in case you need an extension cord it is necessary to use a dedicated extension of the sensor of the same parameters!

Zobacz więcej

TATAREK reed relay door sensor - the sensor is intended for use with the controllers RT-08 OM, the RT-08 OS, SAC RT-08 and RT-08 OS GRAFIK. It detects the firebox opening. By using this type of sensor the combustion process can be automatically suspended by the controller while the air damper is being fully opened. The closing of the door switches the controller to an automatic reading of the burning parameters, and then depending on the temperature distribution and the dynamics of their growth or decline – the restoration of a proper burning phase at the given moment occurs.

Zobacz więcej

The GAZEX detector is designed for a continuous monitoring of carbon monoxide in areas at risk of emission of this gas. The control is based on a cyclical measurement of CO concentration in the ambient air. After exceeding a determined value of CO and a determined time of exposure the alarm signalling of the detector is switched on. The alarm is turned on at a concentration over 0.005% of CO after an exposure time of over 60 minutes or at a concentration of 0.01% after 10 min or at a concentration of 0.03% within 3 min.

Zobacz więcej

The BELIMO TF230 servomotor is used to drive the chimney flap and it's a device that combined with the controllers RT-08 SAC, RT-08 OS and RT-08 OS GRAFIK ensures a fully automatic operation of heat storage systems also in conjunction with the cooperating water base. This servomotor has been selected after extensive tests and provides the appropriate force necessary for running the operation of the chimney flap at all times (even when the impurities gather).

Zobacz więcej

T-ZESTAW01
CZUJ6-G
OSLONA04
PRZED03

The mounting kit of the BELIMO TF230 servomotor is a kit for mounting the Belimo TF230 servomotor. The kit mounts it stable in a flat or side position, providing a full transfer of power of the servomotor to the chimney flap.For the mentioned kit it is necessary to buy a power transmission rod of a diameter of 6 mm and any length depending on the installation place of the servomotor. This servomotor has been selected after extensive tests and provides the appropriate force necessary for running the operation of the chimney flap at all times (even when the impurities gather).

Zobacz więcej

Sensor for measuring temperature of flue gas (0 ... 1200 ° C) in stoves and stove-fitting furnaces for the controllers RT-08OM / OMG, RT-08OS / OSG, RT-08SAC.

Zobacz więcej

CERAMIC COVER FOR THERMOCOUPLE 12
Ceramic cover for the flue gas sensor dedicated to type K thermocouple sensors.
Protects the sensor measuring post against direct exposure to flames.
Parameters:

     Length: 120 mm
     Thread: M8x1
     Outer diameter of cover: Ø6
     Inside diameter of cover: Ø4

Zobacz więcej

EXTENSION PIECE OF FLUE GAS TEMPERATURE SENSOR (thermocouple) for the controllers: RT-08OM, RT-08OM GRAPHICS, RT-08OS, RT-08SAC, RT-08OS GRAFIK

The original, dedicated extension of the temperature sensor of flue gas (thermocouple type K) with the junction tip

Zobacz więcej

NASI DYSTRYBUTORZY...

See our prizes and certificates

Additional information

Information

What's new

CONVERTERS AND CHARGERS

Phone information

We're open Mon-Fri 7-15

Office

Call us or send an email

ZRT18OS

Call us or send an email

User manual

Informacje o produkcie

Specyfikacja

Type of air damper:

Diameter of air damper:

Wyposażenie opcjonalne

Produkty powiązane