Those are devices whose task is to charge the cell. The charging parameters are dependent on a type and capacity of the battery. The most important parameters which must be considered while selecting a charger:

  • type of battery,
  • capacity,
  • maximum charging current,
  • voltage,
  • temperature.

Battery chargers are used to charge nickel-cadmium (NiCd), nickel-hydride (NiMH), gel, AGM and lead-acid batteries. Our chargers have systems for automatic adjustment of the charging current so that the  cells are protected against overload. After the charging process the charger system goes into standby state buffering the cell. In this state the charger makes up the energy losses due to self-discharge of the battery.





Description: 

It is used to charge the Ni-Cd batteries of a maximum capacity of 700 mAh type R6 (AA) and 6F22 (9V-E-BLOCK).

Price on request

Please contact our sales department

tel 71 367 21 67

tel 71 373 14 88

tatarek@tatarek.com.pl




Description: 

Modern, comfortable to use and smart charger ZL-7 is used for a simultaneous charging of Ni-Cd and Ni-MH batteries type R6 (AA) and / or R03 (AAA). At the same time it supports 1 to 4 of the batteries. The number of used cells does not affect the charging time (see table). Completion of charging is indicated by a blinking or turned-off diodes (LEDs). After the process, the device automatically enters a cyclical recharging. In this way, the batteries are left in the chamber, ready for use at any time.

Price on request

Please contact our sales department

tel 71 367 21 67

tel 71 373 14 88

tatarek@tatarek.com.pl




U (Volt): 
6.00
I (Amper): 
1.50
Description: 

The device is used to cyclically charge gel batteries, AGM 6V with full control of the state of charge of the battery. It is equipped with an optical signaling of the status: red means charging, and green indicates the end of the process. After charging the charger disconnects voltage, the charging current = 0.

Subtotal166,07 zł
VAT 23%38,19 zł
Price204,26 zł




U (Volt): 
6.12
I (Amper): 
1.50
Description: 

Designed for cyclic charging gel batteries, AGM 6V / 4 ÷ 12Ah and 12V / 20Ah ÷ 3.3 by constant voltage with current limit. Features: - Automatic selection of a voltage range of the charged battery 6V or 12V - Protection of the secondary side against reverse battery connection - repeatable polySwitch - Charging indication (red LED at Icharging≥ 150mA) - Charging indication (green LED at Icharging< 150mA)

Subtotal121,79 zł
VAT 23%28,01 zł
Price149,80 zł
Dokumentacja: 
AttachmentSize
PDF icon ladowarkat625_la_6v-12v_1_5a.pdf319.88 KB




U (Volt): 
6.90
I (Amper): 
0.40
Description: 

The charger is designed to maintain the operational readiness of the battery during storage. - Protection of the primary side of the transformer (thermal fuse) - Protection of the secondary side against reverse battery connection - repeatable polySwitch - Indication of output voltage (green LED at Iout <100mA) - Output voltage indication (LED red at Iout> 120mA)

Subtotal101,00 zł
VAT 23%23,23 zł
Price124,23 zł
Dokumentacja: 




U (Volt): 
6.90
I (Amper): 
0.40
Description: 

The charger is designed to maintain the operational readiness of the battery during storage.
- Protection of the primary side of the transformer (thermal fuse)
- Protection of the secondary side against reverse battery connection - repeatable PolySwitch
- Indication of output voltage (green LED at Iout <100mA
- Output voltage indication (LED red at Iout> 120mA

Subtotal72,12 zł
VAT 23%16,59 zł
Price88,71 zł
Dokumentacja: 




U (Volt): 
12.00
Description: 

The signalling device of battery discharge SRA 01 / 12V The device monitors the gel or AGM battery voltage to protect him from discharging below 10.5V. When the battery voltage reaches the minimum limit of 10,6V the device emits a loud sound and the LED lights up, which inform the user about the battery being discharged and the need for recharging.

Subtotal32,55 zł
VAT 23%7,49 zł
Price40,04 zł
Dokumentacja: 
AttachmentSize
PDF icon sygnalizator_sra_01_tatarek.pdf562.68 KB




U (Volt): 
12.00
I (Amper): 
1.50
Description: 

CHARGER OF GEL AND AGM BATTERIES ZN-L-12V/1,5A SLA TATAREK
The device is used to cyclically charge gel batteries, AGM 12V with full control of the state of charge of the battery. It is equipped with an optical signaling of the status: red means charging, and green indicates the end of the process. After charging the charger disconnects voltage, the charging current = 0.

Subtotal166,07 zł
VAT 23%38,19 zł
Price204,26 zł




U (Volt): 
13.80
I (Amper): 
0.40
Description: 

The charger is designed to maintain the operational readiness of the battery during storage. - Protection of the primary side of the transformer (thermal fuse); - Protection of the secondary side against reverse battery connection - repeatable PolySwitch; - Indication of output voltage (green LED at Iout <100mA ; - Output voltage indication (LED red at Iout> 120mA

Subtotal101,00 zł
VAT 23%23,23 zł
Price124,23 zł
Dokumentacja: 




U (Volt): 
13.80
I (Amper): 
0.40
Description: 

The charger is designed to maintain the operational readiness of the battery during storage.
Layout of output contacts: (+) red, (-) black or blue;
Max. current: 400mA (output);
Input voltage: 230VAC, 50Hz / 52mA / 12VA;
Output voltage: 13,8 VDC;
Uout stability (at 9÷13,6V) : 350 ÷ 400mA;
Housing protection: IP30;
Operating temperature: 0 ÷ 40 ° C;
Flammability class: UL94-V0;

Output cable: 2x 0,75mm², length 2m;
Output plug: XLR-3W;
Battery type: Pb 12V/ 4 ÷ 120Ah;
Dimensions (WxHxD): 61x88x50;
Weight: 400g;
Housing colour: black;
Type of packaging: zip bag / carton 12W;
Insulation resistance: 3kVAC / 1min, resistance ≥200MΩ, KL.II;
Charging current: 400mA ;
Power supply: 230VAC, 50Hz / 52mA / 12VA;
Features:
- Protection of the primary side of the transformer (thermal fuse);
- Protection of the secondary side against reverse battery connection - repeatable PolySwitch;
- Indication of output voltage (green LED at Iout<100mA;
- Output voltage indication (LED red at Iout > 120mA;

Subtotal72,12 zł
VAT 23%16,59 zł
Price88,71 zł
Dokumentacja: 




U (Volt): 
13.80
I (Amper): 
0.40
Description: 

The charger is designed to maintain the operational readiness of the battery during storage.
Layout of output contacts: (+) red, (-) black or blue;
Max. current: 400mA (output);
Input voltage: 230VAC, 50Hz / 52mA / 12VA;
Output voltage: 13,8 VDC;
Uout stability (at 9÷13,6V) : 350 ÷ 400mA;
Housing protection: IP30;
Operating temperature: 0 ÷ 40 ° C;
Flammability class: UL94-V0;
Output cable: 2x 0,75mm², length 2m;
Output plug: XLR-3W;
Battery type: Pb 12V/ 4 ÷ 120Ah;
Housing colour: black;
Type of packaging: zip bag / carton 12W;
Insulation resistance: 3kVAC / 1min, resistance ≥200MΩ, KL.II;
Charging current: 400mA ;
Power supply: 230VAC, 50Hz / 52mA / 12VA;
Features:
- Protection of the primary side of the transformer (thermal fuse);
- Protection of the secondary side against reverse battery connection - repeatable PolySwitch;
- Indication of output voltage (green LED at Iout<100mA;
- Output voltage indication (LED red at Iout > 120mA;

Price on request

Please contact our sales department

tel 71 367 21 67

tel 71 373 14 88

tatarek@tatarek.com.pl
Dokumentacja: 




U (Volt): 
13.80
I (Amper): 
0.40
Description: 

The charger is designed to maintain the operational readiness of the battery during storage.
Layout of output contacts: (+) red, (-) black or blue;
Max. current: 400mA (output);
Input voltage: 230VAC, 50Hz / 52mA / 12VA;
Output voltage: 13,8 VDC;
Uout stability (at 9÷13,6V) : 350 ÷ 400mA;
Housing protection: IP30;
Operating temperature: 0 ÷ 40 ° C;
Output cable: 2x 0,75mm², length 2m;
Output plug: XLR-3W;
Battery type: Pb 12V/ 4 ÷ 120Ah;
Type of packaging: zip bag / carton 12W;
Insulation resistance: 3kVAC / 1min, resistance ≥200MΩ, KL.II;
Features:
- Protection of the primary side of the transformer (thermal fuse);
- Protection of the secondary side against reverse battery connection - repeatable PolySwitch;
- Indication of output voltage (green LED at Iout<100mA;)
- Output voltage indication (LED red at Iout > 120mA;)

Price on request

Please contact our sales department

tel 71 367 21 67

tel 71 373 14 88

tatarek@tatarek.com.pl
Dokumentacja: 




U (Volt): 
13.80
I (Amper): 
0.40
Description: 

The charger is designed to maintain the operational readiness of the battery during storage.
Layout of output contacts: (+) red, (-) black or blue;
Max. current: 400mA (output);
Input voltage: 230VAC, 50Hz / 52mA / 12VA;
Output voltage: 13,8 VDC;
Uout stability (at 9÷13,6V) : 350 ÷ 400mA;
Housing protection: IP30;
Operating temperature: 0 ÷ 40 ° C;
Output cable: 2x 0,75mm², length 2m;
Battery type: Pb 12V/ 4 ÷ 120Ah;
Type of packaging: zip bag / carton 12W;
Insulation resistance: 3kVAC / 1min, resistance ≥200MΩ, KL.II;
Features:
- Protection of the primary side of the transformer (thermal fuse);
- Protection of the secondary side against reverse battery connection - repeatable PolySwitch;
- Indication of output voltage (green LED at Iout<100mA;)
- Output voltage indication (LED red at Iout > 120mA;)

Price on request

Please contact our sales department

tel 71 367 21 67

tel 71 373 14 88

tatarek@tatarek.com.pl
Dokumentacja: 




U (Volt): 
13.80
I (Amper): 
0.40
Description: 

The charger is designed to maintain the operational readiness of the battery during storage.
Layout of output contacts: (+) red, (-) black or blue;
Max. current: 400mA (output);
Input voltage: 230VAC, 50Hz / 52mA / 12VA;
Output voltage: 13,8 VDC;
Uout stability (at 9÷13,6V) : 350 ÷ 400mA;
Housing protection: IP30;
Operating temperature: 0 ÷ 40 ° C;
Output cable: 2x 0,75mm², length 2m;
Battery type: Pb 12V/ 4 ÷ 120Ah;
Type of packaging: zip bag / carton 12W;
Insulation resistance: 3kVAC / 1min, resistance ≥200MΩ, KL.II;
Features:
- Protection of the primary side of the transformer (thermal fuse);
- Protection of the secondary side against reverse battery connection - repeatable PolySwitch;
- Indication of output voltage (green LED at Iout<100mA;)
- Output voltage indication (LED red at Iout > 120mA;)

Subtotal20,82 zł
VAT 23%4,79 zł
Price25,61 zł
Dokumentacja: 




U (Volt): 
13.80
I (Amper): 
0.40
Description: 

The charger is designed to maintain the operational readiness of the battery during storage.
Layout of output contacts: (+) red, (-) black or blue;
Max. current: 400mA (output);
Input voltage: 230VAC, 50Hz / 52mA / 12VA;
Output voltage: 13,8 VDC;
Uout stability (at 9÷13,6V) : 350 ÷ 400mA;
Operating temperature: 0 ÷ 40 ° C;
Output cable: 2x 0,75mm², length 2m;
Battery type: Pb 12V/ 4 ÷ 120Ah;
Type of packaging: zip bag / carton 12W;
Insulation resistance: 3kVAC / 1min, resistance ≥200MΩ, KL.II;
Features:
- Protection of the primary side of the transformer (thermal fuse);
- Protection of the secondary side against reverse battery connection - repeatable PolySwitch;
- Indication of output voltage (green LED at Iout<100mA;)
- Output voltage indication (LED red at Iout > 120mA;)

Price on request

Please contact our sales department

tel 71 367 21 67

tel 71 373 14 88

tatarek@tatarek.com.pl
Dokumentacja: