The signalling device of battery discharge SRA 01 / 12V The device monitors the gel or AGM battery voltage to protect him from discharging below 10.5V. When the battery voltage reaches the minimum limit of 10,6V the device emits a loud sound and the LED lights up, which inform the user about the battery being discharged and the need for recharging.
DC/DC car regulated adapters from the CA - 7000 series have got an electronically protected output. They are well regulated to protect the powered device against fluctuations in the electrical system of the car. The maximum load of this model is 500mA.
CHARGER OF GEL AND AGM BATTERIES ZN-L-12V/1,5A SLA TATAREK
The device is used to cyclically charge gel batteries, AGM 12V with full control of the state of charge of the battery. It is equipped with an optical signaling of the status: red means charging, and green indicates the end of the process. After charging the charger disconnects voltage, the charging current = 0.
Protections: over-voltage, thermal, overload.
Input voltage 85 - 264 V AC or 110 - 380 V DC.
Output voltage: 12 V / 2 A.
Continuous output power: <30 W.
Instantaneous output power: <50 W.
Uout stability: 1%.
accuracy of Uout: 1%.
Housing protection: IP 30.
Efficiency: >75 %.
Operating temperature: 0 - 50°C.
Flammability class : UL94-V0.
LVD according to: EN 61204.
EMC according to : EN 61204-3.
Ripple (peak-to-peak) : <1%.
Dimensions (WxHxD) : 48x82x105.
Housing colour : black.
Type of packaging : zip bag.
Notes:
There is a possibility of designing the power supply with a different voltage and current.
Description:
Power supplies of the series 25M are compact and enable a quick mounting on the TS35 rail.
Power supply 90 - 260 V AC or 110 - 380 V DC.
Output power 50 - 60 W.
Ripple of output voltage (peak-to-peak) < 2 %.
Regulation accuracy at the changes of power supply (all outputs) < 0.5 %.
Regulation accuracy at the changes of load current ( output 1: < 1 % ; output 2 and 3 < 2 % )
Insulation resistance input- output 5300 V DC.
Design meets the requirements of EU directives (LVD and EMC)
Power supply has CE-marking.
Protections: over-voltage, short-circuit, overload.
Input voltage: 187 - 242 V AC or 240 - 350 V DC
Output voltage: 12 V / 8 A.
Output power: <120 W.
Uout stability: <0,5%.
accuracy of Uout: <0,5%.
Housing protection: IP 30.
Efficiency: 75 - 85%.
Galvanic isolation: 5,3 kV DC (input-output).
Operating temperature: 0 - 50 ° C.
Flammability class: UL94-V0.
LVD according to EN 61204.
EMC according to EN 61204-3.
Ripple (peak-to-peak): <2%.
Dimensions (WxHxD): 102x102x125.
Weight: 1055g.
Housing colour: black.
Type of packaging: film.
Insulation resistance: 5300 V DC input – output.
Options. On request the power supply can be equipped with signaling systems of power failure and remote switching on and off.
Notes:
Possibility of designing the power supply in version 85 - 140 V AC.
DIN rail mounting 35 mm (screw connection).
Power supply: 180 - 260 V AC or 240 - 380 V DC.
Maximum output power: 200 W.
Ambient temperature ( at full load): 0 °C - +50 °C.
Ripple of output voltage (peak-to-peak): < 2 %.
Regulation accuracy at the changes of power supply:
output 1 and 2 - < 0.5 %.
Regulation accuracy at the changes of load current:
output 1 and 2 - < 0.5 %.
Insulation resistance:
input- housing- 2100 V DC,
input- output- 5300 V DC,
output- housing- 500 V DC ,
Design meets the requirements of Polish and international safety standards and electromagnetic compatibility
OPTIONS::
Alarm signal of low power- Power Fail.
Remote switching on/off .
Mounting on the TS35 rail with the help of additional set of handles.
Power supply: 180 - 260 V AC or 240 - 380 V DC.
Maximum output power: 270 W.
Ambient temperature ( at full load): 0 °C - +50 °C.
Ripple of output voltage (peak-to-peak): < 2 %.
Regulation accuracy at the changes of power supply: < 0.5 %.
Regulation accuracy at the changes of load current: < 0.5 %.
Insulation resistance:
input- housing- 2100 V DC,
input- output- 5300 V DC,
output- housing- 500 V DC ,
Design meets the requirements of Polish and international safety standards and electromagnetic compatibility
OPTIONS:
Parallel cooperation of power supplies with equal division of current (only 240CS version).
Alarm signal of low power- Power Fail.
Remote switching on/off .
Mounting on the TS35 rail with the help of additional set of handles.
The charger is designed to maintain the operational readiness of the battery during storage. - Protection of the primary side of the transformer (thermal fuse); - Protection of the secondary side against reverse battery connection - repeatable PolySwitch; - Indication of output voltage (green LED at Iout <100mA ; - Output voltage indication (LED red at Iout> 120mA
English
Polski
