Temperature sensor of the KTY series with the STB (0…+100°C) protection is  intended for the RT-01B and RT-02B controllers to measure water temperature in the boiler.

 



The device is used in vehicles with a voltage of 12V DC (OGS-12) or 24V DC (OGS-24). Small rodents (mice, rats, etc.) as well as martens and weasels can cause significant damage to vehicles by chewing on wires, cables or insulating materials. The device emits an intermittent ultrasonic signal of variable frequency, which is harmless to humans and pets. The device should be installed in the engine area, in a place where it will not be directly exposed to splashing with water or other operating fluids used in vehicles. The device is installed using the high temperature resistant double-sided adhesive tape included in the kit. The place where the repeller will be attached should be cleaned and degreased. Install the repeller by means of the red (+) black (-) power cables directly to the battery terminals (recommended).

Device operation range up to 2-3 m2.

Ultrasonic frequency from 13-30kHz ± 10%

Device operating temperature: -20C to + 60C.

The use of the device helps to reduce the risk of rodents, martens and weasels in the protected area

 



Relaxing in the bosom of nature is undoubtedly a wonderful experience, but being in close contact with troublesome fleas, ticks and other parasites that are carriers of various viruses and bacterial diseases leads to disturbing dermatological changes. The electronic device "SKUDO HUMAN BLUE" reduces the risk of a human being bitten by ticks to a large extent, the bite may lead to diseases that are dangerous to human life, borreliosis or other tick-borne disease. The repeller emits modulated ultrasounds that are not tolerated by ticks and are inaudible to humans and pets. The device is intended in particular for people who actively spend their time in the bosom of nature (foresters, anglers, mushroom pickers, hunters), and other people who perform their activities in close contact with nature. Avoid carrying the device in pockets, backpacks, bags - as a result, suppressed ultrasounds reduce the effectiveness of repelling ticks and fleas.

PRODUCT DESCRIPTION:

  •     about 12 months of effective operation
  •     the device has an ON / OFF function
  •     after removing the protection, the device can be turned ON or OFF at any time with the switch
  •     does not emit any chemicals
  •     inaudible to humans and pets
  •     easy to use
  •     safe for people and small children
  •     does not interfere with electronic devices
  •     safe for the environment
  •     resistant to moisture
  •     protected area up to 5m2
  •     weight - 15 g
  •     dimensions - approx. 30 x 10 x 55 mm

PRECAUTIONS:

  •     do not submerge in water
  •     do not open the device

A 300 WAC sinus - combines the functions of an emergency/backup power supply, charger, converter and output voltage stabilizer. The A300WAC ensures operation of devices powered by 230V alternating current with a constant power not exceeding 300 W. This power supply works with the traction battery and guarantees virtually uninterrupted power supply for central heating stoves, water-jacket stoves, solar systems, central heating pumps and household appliances.

The RT-18 VETRO OM controller is the most efficient power optimizer to operate "air" stove inserts and stove-fitting furnaces, operating in gravitational heat distribution systems, cooperating with the DGP installation, or supplying small storage masses - especially in the so-called warm buildings. The controller software also allows you to operate the water system, but then you need to purchase additional dedicated water sensors (RT-18 VERTO OM / GX - available in the set). This controller provides support for external devices, such as: a ventilation device, a recuperator, a chimney fan or an flsp drive of storage mass. In this model, it is possible to use a door sensor! The model is offered only with a SEALED damper !!!

The RT-18 VETRO OM / GX controller is the most efficient combustion optimizer for servicing stove-stove furnaces and fireplace inserts that supply storage masses. The software also allows you to operate the water system, but then you need to purchase additional dedicated water sensors (RT-18 VERTO OM / GX). This controller provides support for external devices, such as: a ventilation device, a recuperator, a chimney fan or a flap drive of  storage mass. For  this model, it is possible to use a door sensor! The model is offered only with a SEALED damper !!! The set does not include sensors for handling water systems! NOVELTY!!!                                         

The RT-18 VETRO OS controller is the most efficient combustion optimizer for the operation of stove-fitting furnaces and stove inserts that supply storage masses. The software also allows you to operate the water system, but then you need to purchase additional dedicated water sensors (RT-18 VERTO OS / GX - available in the set). This controller provides support for external devices, such as: a ventilation device, a recuperator, a chimney fan or an accumulator mass damper drive. In this model, it is possible to use a door sensor! The model is offered only with a SEALED damper !!! The set does not include sensors for handling water systems! NOVELTY!!!
Preloaded language software: POLISH, GERMAN. ENGLISH                   

The RT-18 VETRO OS / GX controller is the most efficient combustion optimizer for the operation of stove-fitting furnaces and stove inserts that supply storage masses. The software also allows you to operate the water system, but then it is required to purchase additional dedicated water sensors (RT-18 VERTO OS / GX). This controller provides support for external devices, such as: a ventilation device, a recuperator, a chimney fan or an accumulator mass damper drive. In this model, it is possible to use a door sensor!
The model is offered only with a SEALED damper !!!
The set includes 3 sensors for handling water systems! NOVELTY!!!

Preloaded language software: POLISH, GERMAN. ENGLISH

           

Temperature sensor of the boiler water (0…+100°C)  is  intended for the RT-01 ANIA and RT-02 ANETA controllers to measure water temperature in the boiler.

The RT-01 ANIA and RT-02 ANETA controllers are no longer manufactured.



The device is used in vehicles with a voltage of 12V DC (OGS-12) or 24V DC (OGS-24). Small rodents (mice, rats, etc.) as well as martens and weasels can cause significant damage to vehicles by chewing on wires, cables or insulating materials. The device emits an intermittent ultrasonic signal of variable frequency, which is harmless to humans and pets. The device should be installed in the engine area, in a place where it will not be directly exposed to splashing with water or other operating fluids used in vehicles. The device is installed using the high temperature resistant double-sided adhesive tape included in the kit. The place where the repeller will be attached should be cleaned and degreased. Install the repeller by means of the red (+) black (-) power cables directly to the battery terminals (recommended).

Device operation range up to 2-3 m2.

Ultrasonic frequency from 13-30kHz ± 10%

Device operating temperature: -20C to + 60C.

The use of the device helps to reduce the risk of rodents, martens and weasels in the protected area

A 500 WAC sinus - combines the functions of an emergency/backup power supply, charger, inverter and output voltage stabilizer. A500WAC ensures operation of devices powered by 230V alternating current with a constant power not exceeding 500 W. This power supply works with the traction battery and guarantees virtually uninterrupted power supply for central heating stoves, water-jacket stoves, solar systems, central heating pumps and household appliances.



Description
The device is used indoors (residential buildings, industrial facilities, farm buildings, summer houses, etc.). The device emits a modulated acoustic signal of variable frequency, scaring away small rodents, e.g. rats, mice, martens and weasels. Rodents, martens and weasels do not tolerate the generated signals, which are very burdensome and unpleasant for their hearing center. After a few days (adaptation period), they bypass the places where the device is installed.
Device characteristics
The repeller is adapted only to a 230V mains supply, the repeller has a very economical power supply, in 24H operation mode, consumes only 0.8 kWh per month.

Product parameters

  • Power consumption: 0.9 W
  • Energy consumption: (monthly) 0.8 kWh
  • Ultrasound range: 14, 19, 51 kHz randomly ± 10%
  • The operating range of the device is up to 70-100 m2
  • Device operating temperature: -20C to + 60C.
  • Dimensions (H x W x L): 86 x 61 x 84 mm
  • Weight: 0.115 kg

The use of the device helps to reduce the risk of rodents, martens and weasels in the protected area

 

SN-300 - The plug-in voltage regulator is designed to protect sensitive equipment against interference from the mains, generated by various types of machines, lighting fixtures, etc. It suppresses among other things voltage surges, harmonic disturbance and voltage changes. The design of the regulator is based on a transformer, which is always saturated , which gives a good compensation of voltage variations. The SN-300 voltage regulator maintains a stable voltage of 230V. It ensures the correct operation of devices sensitive to fluctuations in voltage. In addition, the regulator protects the connected equipment from sudden increases or decreases in supply voltage (more than 275V or less than 155V) by disconnecting fast its power supply.



The device repels small rodents (mice, rats, sewer rats, etc.) as well as martens and weasels. It emits an intermittent ultrasonic signal of variable frequency (rodents, martens and weasels are not able to get used to this sound and do not inhabit the area protected by "sounds"). This model is intended for uninhabited areas. Device operation is indicated by a green LED.

  • The set includes a power supply
  • The operating range of the device is up to 200 m2.
  • Ultrasound range: 14, 19, 51 kHz randomly ± 10%
  • Device operating temperature: -20C to + 60C.

The use of the device helps to reduce the risk of rodents, martens and weasels in the protected area

 

BATTERY AGM 80 Ah - Reliable battery AGM (Absorbed Glass Mat) with a capacity of 80Ah, where the whole electrolyte is absorbed in the separators of glass fiber of great porosity, located between the plates. Batteries made by this method have a lower internal resistance and thus a higher voltage at the terminals, as well as longer battery life, especially at high discharge current . It can be used indoors. Battery, maintenance free, made in AGM technology, designed for buffer operation (uninterruptible power supply) in applications requiring long life.

Projected life of 10-12 years.

TEMPERATURE SENSOR OF GLYCOL IN SOLAR SYSTEM (-50°C …+200°C) for the RT-08G BUFOR-SOLAR controller



The device repels small rodents (mice, rats, sewer rats, etc.) as well as martens and weasels. It emits an intermittent ultrasonic signal of variable frequency (rodents, martens and weasels are not able to get used to such a sound and do not inhabit the area protected by "sounds"). The "silent" OdH1 model emits sound signals inaudible to the human ear, therefore this model is suitable for residential areas. For uninhabited areas, the OdH1 model is "audible" (audible).

The set includes R14 batteries

The operating range of the device is up to 100 m2.

Ultrasound range: 14, 19, 51 kHz randomly ± 10%

Device operating temperature: -20C to + 60C.

The use of the device helps to reduce the risk of rodents, martens and weasels in the protected area

 

AGM 65 Ah BATTERY - Reliable AGM battery (Absorbed Glass Mat) with a capacity of 65Ah, in which the entire electrolyte is absorbed in glass fiber separators with great porosity, located between the plates. Batteries produced by this method have a lower internal resistance, and thus a higher voltage at the terminals, as well as a longer working time, especially when discharged with high current. It can be used indoors.

weight: 21 kg.


dimensions: 360 x176 x 217

WATER TEMPERATURE SENSOR OF STOVE ((0…+100°C) for the RT-03B controller

The essential temperature sensor of water in the stove water jacket for the RT-03B WOJTUŚ controller with extra temperature protection of the cable.

Type of sensor: digital DALLAS



The device repels small rodents (mice, rats, sewer rats, etc.) as well as martens and weasels. It emits an intermittent ultrasonic acoustic signal of variable frequency (rodents, martens and weasels are not able to get used to this sound and do not inhabit the area protected by "sounds"). The "silent" OdH1 model emits sound signals inaudible to the human ear, therefore this model is suitable for residential areas. For uninhabited areas, the OdH1 model is "audible" (audible).

The set includes R14 batteries

The operating range of the device is up to 100 m2.

Ultrasound range: 14, 19, 51 kHz randomly ± 10%

Device operating temperature: -20C to + 60C.

The use of the device helps to reduce the risk of rodents, martens and weasels in the protected area

SENSOR OF AIR TEMPERATURE FOR STOVE TURBINES (0…+200°C) dedicated for the RT-03C controller.

Sensor of air temperature that measures temperature at the inlet of hot air of the stove turbine for the RT-03C ARO controller.



Electronic - acoustic repeller of moles, voles, field mice and other common rodents. The device is waterproof, and fully resistant to weather conditions and water, therefore it is perfect for use in gardens, gardens, forest parks, golf courses, and other outdoor surfaces where there is harmful interference of pests in the ecosystem of soil, grasses, trees, vegetables. , fruit, when inserted into the ground, the repeller emits a sound of variable frequency. The device does not endanger people or pets in any way

Effective operating area up to 400m2 underground!

Power supply: 6 pcs. R14 1.5V batteries; battery life up to 6 months (no batteries included)

It does not interfere with the operation of other electronic devices

Variable frequency of the sound produced

Working temperature: -20 ° C to + 50 ° C

Device dimensions: 185mm x 88mm x 31mm

Weight without batteries: 0.45 kg

The use of the device helps to reduce the risk of rodents in the protected area

Temperature sensor of the boiler water with STB (0…+100°C)  is  intended for the RT-04B ADAŚ and RT-04C controllers to measure water temperature in the boiler.

Temperature sensor of the boiler water (0…+100°C)  is  intended for the RT-04 ADAS controller  to measure water temperature in the boiler.

The RT-04 ADAS controller is no longer manufactured.

SENSOR OF AIR TEMPERATURE FOR  TURBINES (0…+200°C) dedicated for the RT-05 controller.

Sensor of air temperature that measures temperature at the inlet of hot air of the stove turbine for the RT-05 JACUŚ controller.

Sensor for measuring temperature of flue gas (0 ... 1200 ° C) in stoves and stove-fitting furnaces for the controllers RT-08OM / OMG, RT-08OS / OSG RT-08SAC. When used in furnaces where the sleeve of the sensor is exposed to direct contact with flames an extra  ceramic cover is required to be applied !!!

Due to the specific construction of the sensor cable in case you need an extension cord it is necessary to use a dedicated extension of the sensor of the same parameters!

Sensor for measuring temperature of flue gas (0 ... 1200 ° C) in stoves and stove-fitting furnaces for the controllers RT-08OM / OMG, RT-08OS / OSG, RT-08SAC.

This thermocouple is constructed bent, so it can be used in places where the standard simple solution is not fit. When used in furnaces where the sleeve of the sensor is exposed to direct contact with flames an extra  ceramic cover is required to be applied !!! Due to the specific construction of the sensor cable in case you need an extension cord it is necessary to use a dedicated extension of the sensor of the same parameters!

EXTENSION PIECE OF  FLUE GAS TEMPERATURE SENSOR (thermocouple) for the controllers: RT-08OM, RT-08OM GRAPHICS, RT-08OS, RT-08SAC, RT-08OS GRAFIK

The original, dedicated extension of the temperature sensor of flue gas (thermocouple type K) with the junction tip

TEMPERATURE SENSOR OF GLYCOL IN SOLAR SYSTEM (-50°C …+200°C) for the following controllers: RT-08 DUO, RT-08 T, RT-08 TH, RT-08 TL

TEMPERATURE SENSOR OF WATER IN HEATING SYSTEM (0…+100°C) for the following controllers of solar type: RT-08 DUO, RT-08 T, RT-08 TH, RT-08 TL

CERAMIC COVER FOR THERMOCOUPLE 12
Ceramic cover for the flue gas sensor dedicated to type K thermocouple sensors.
Protects the sensor measuring post against direct exposure to flames.
Parameters:

     Length: 120 mm
     Thread: M8x1
     Outer diameter of cover: Ø6
     Inside diameter of cover: Ø4

TEMPERATURE SENSOR OF STOVE WATER ((0…+100°C) for the  controllers: RT-08G, RT-08P, RT-08K, RT-08OS

The essential temperature sensor of water in the stove water jacket for the  controllers: RT-08G, RT-08P, RT-08K, RT-08OS with extra temperature protection of the cable.

TEMPERATURE SENSOR OF  WATER IN HEATING SYSTEM (0…+100°C) for the  controllers: RT-08G, RT-08P, RT-08K, RT-08OS, RT-12

Temperature sensor of water in the heating system  for the  controllers: RT-08G, RT-08P, RT-08K, RT-08OS, RT-12

Temperature sensor of the boiler water  (0…+100°C)  is  intended for the RT-09 controller to measure water temperature in the boiler.

Temperature sensor of  the boiler water with STB (0…+95°C)  is  intended for the RT-09 controller to measure water temperature in the boiler.

Temperature sensor protects the boiler operation (alarm), that is, if the primary temperature sensor fails.

Temperature sensor for boilers with feeder for the RT-09 controller + STB (0…+70°C)

Temperature sensor protects the feeder against the withdrawal of flame.

Temperature sensor of  water in the HW (0…+100°C)  is  intended for the RT-09 controller to measure water temperature in the hot water storage tank.

Brass cover head for  temperature sensors of water in the water jacket, boiler, HW storage tank or buffer storage tank

Thread 1/2 in.

TATAREK reed relay door sensor - the sensor is intended for use with the controllers RT-08 OM, the RT-08 OS, SAC RT-08 and RT-08 OS GRAFIK. It detects the firebox opening. By using this type of sensor the combustion process can be automatically suspended by the controller while the air damper is being fully opened. The closing of the door switches the controller to an automatic reading of the burning parameters, and then depending on the temperature distribution and the dynamics of their growth or decline – the restoration of a proper burning phase at the given moment occurs.

The air damper having a diameter of 100 mm, without the seal or with the seal of the control wing dedicated to supply air to the combustion chamber in stoves with water jacket, stove-fitting furnaces and air stoves.

The Ø 100 mm unsealed air damper  is dedicated for controllers such as: RT-08G, RT-08P, ZRP1
It brings air into the combustion chamber in stoves with water jacket.
The minimum gap around the air damper wing provides minimum airflow, allowing to balance the pressure difference and thus prevents this kind of inserts from damage in case of adverse weather conditions or when power failure occurs.

The Ø 100 mm sealed air damper  is dedicated for controllers such as: RT-08OM, RT-08OS, RT-08SAC

The air damper having a diameter of 120 mm, without the seal or with the seal of the control wing dedicated to supply air to the combustion chamber in stoves with water jacket, stove-fitting furnaces and air stoves.

The Ø 120 mm unsealed air damper  is dedicated for controllers such as: RT-08G, RT-08P, ZRP1
It brings air into the combustion chamber in stoves with water jacket.
The minimum gap around the air damper wing provides minimum airflow, allowing to balance the pressure difference and thus prevents this kind of inserts from damage in case of adverse weather conditions or when power failure occurs.

The Ø 120 mm sealed air damper  is dedicated for controllers such as: RT-08OM, RT-08OS, RT-08SAC

The air damper having a diameter of 150 mm, without the seal or with the seal of the control wing dedicated to supply air to the combustion chamber in stoves with water jacket, stove-fitting furnaces and air stoves.

The Ø 150 mm unsealed air damper  is dedicated for controllers such as: RT-08G, RT-08P, ZRP1
It brings air into the combustion chamber in stoves with water jacket.
The minimum gap around the air damper wing provides minimum airflow, allowing to balance the pressure difference and thus prevents this kind of inserts from damage in case of adverse weather conditions or when power failure occurs.

The Ø 150 mm sealed air damper  is dedicated for controllers such as: RT-08OM, RT-08OS, RT-08SAC

DUO damper Ø 120 mm. Cold air damper with a diameter of 120 mm, symmetrically divided into two independently adjustable air ducts. It allows, in combination with a dedicated controller, for fully automatic regulation of the amount of air supplied to the furnace - separately for the primary and secondary air supply channels.

ONLY FOR USE WITH THE CONTROLLERS IN THE DUO VERSION !!!
RT-08 G DUO; RT-08 G BUFFER DUO, RT-08 OM GRAFIK DUO
DUO dampers may differ slightly in execution for specific manufacturers !!!


CONTROLLERS OFFERED ONLY BY MANUFACTURERS OF STOVE INSERTS AND  FURNACES !!!

DUO damper Ø 150 mm. Cold air damper with a diameter of 150 mm, symmetrically divided into two independently adjustable air ducts. It allows, in combination with a dedicated controller, for fully automatic regulation of the amount of air supplied to the furnace - separately for the primary and secondary air supply channels.

ONLY FOR USE WITH THE CONTROLLERS IN THE DUO VERSION !!!
RT-08 G DUO; RT-08 G BUFFER DUO, RT-08 OM GRAFIK DUO
DUO dampers may differ slightly in execution for specific manufacturers !!!


CONTROLLERS OFFERED ONLY BY MANUFACTURERS OF STOVE INSERTS AND  FURNACES !!!

Cover frame for the  controllers RT-03 and RT-08 in standard and surface-mounted version

Cover frame for the RT-10 TITANIUM controller

Cover frame for controllers with graphic displays from the family RT-08: RT-08 G; RT-08 G BUFOR, RT-08 BUFOR SOLAR, RT-08 OS GRAFIK; RT-08 OM GRAFIK, RT-08 GX

Cover frame for controllers with graphic displays from the family RT-08: RT-08 G; RT-08 G BUFOR, RT-08 BUFOR SOLAR, RT-08 OS GRAFIK; RT-08 OM GRAFIK, RT-08 GX

Cover frame for the controllers RT-03 and RT-08 in TITANIUM version

Cover frame for the controllers RT-08G and RT-08OSG in version WOODLINE1 or WOODLINE2